HP FL939UT FL939UT#ABA, Z800 Sp632up SP632UPABA manual Enww

5.Set the hard drive in the carrier at an angle. Carefully separate the lower hard drive carrier rails , and then lower the drive between them as shown in the following figure.

Align the carrier pins with the drive mounting holes and release the rails to secure the lower-end of the drive in place.

Figure 5-43Installing the drive in the carrier

6.Carefully separate the upper hard drive carrier rails 2, and then rotate the drive upright , as shown above.

Align the carrier pins with the drive mounting holes and release the rails to secure the upper-end of drive in place.

ENWW Removing and installing components 109