HP Z800 Sp632up SP632UPABA, FL939UT FL939UT#ABA manual Installing the Dimm

Installing the DIMM

NOTE: For best performance add DIMMs of the same size in pairs across CPUs.

1.Disconnect power from the workstation (see Predisassembly procedures on page 73).

2.Remove the side access panel (see Removing the side access panel on page 75).

3.Remove the airflow guide (see Removing the airflow guide on page 76).

4.Remove the memory fans (see Removing the memory fans on page 136).

5.Push outward on the DIMM socket levers as shown in the following figure. Figure 5-91Opening DIMM socket levers

142 Chapter 5 Replacing components ENWW