7.Carefully squeeze the ends of the rails together , and then slide the drive out of the carrier 2 as shown in the following figure.

Figure 5-61Removing the drive from the carrier

8.Carefully separate the rails and remove the hard drive 2 as shown in the following figure. Figure 5-62Removing the rails

9.Reinstall all removed components and reconnect any cables that have been disconnected.

120 Chapter 5 Replacing components

ENWW

Page 132
Image 132
HP Z800 Sp632up SP632UPABA, FL939UT FL939UT#ABA manual Enww