EMC QLA22xx, QLA23xx manual Installing an HBA

Installing and Configuring the HBA Driver

Installing an HBA

Follow the instructions included with your adapter. The adapter installs into a single slot, and has no user-configurable jumpers or switches.

Follow these steps to connect the cable to the HBA:

1.(Optical cable only) Remove the protective covers on each fiber-optic cable.

2.Plug one end of the cable into the connector on the HBA as shown in the appropriate figure. (The hardware might be rotated 90 degrees clockwise from the orientation shown.)

• Copper Cable:

• LC Optical Cable:

1 2 3

• SC Optical Cable:

1 2 3

3.Plug the other end of the cable into a connector on the storage system or a hub/switch port.

Installing an HBA 2-3

2