EMC QLA22xx, QLA23xx manual Installation Procedure for Windows NT Hosts, Select HAVE DISK

Installation Procedure for Windows NT Hosts

Installation Procedure for Windows 2000 and Windows 2003 Hosts

Installing and Configuring the HBA Driver

To install the driver, follow these steps:

1.Boot the host with Windows NT 4.0.

2.Open the Control Panel and double-click the SCSI Adapter icon.

3.Select the Drivers tab.

4.Click the Add button to display the SCSI Adapter Drivers database.

5.Select HAVE DISK.

6.Locate the disk with the OEMSETUP.INF file for the QLogic driver and click OK.

7.Select QLogic QLA2300 (or QLA2200) PCI Fibre Channel Adapter and click OK to install it.

8.Reboot the host. It should recognize all new host adapter cards.

9.After rebooting, verify that the driver is installed and has started by checking the Control Panel, SCSI Adapter, Drivers window for a statement similar to the following:

QLogic QLA2300 PCI-Fibre Channel Adapter (Started)

The driver is now loaded and the adapter is available to the system.

To install the driver into a Windows 2000 or Windows 2003 host, follow these steps:

1.Boot the host with Windows 2000 or Windows 2003.

2.From the Windows taskbar, select Start, Programs,

Administrative Tools, Computer Management

3.In the left pane of the Computer Management window, click the Device Manager icon.

4.If Windows Plug-n-Play does not detect your QLA23xx HBA model, it will be listed as Unknown or as a Fibre Channel Controller under the Other Devices icon in the right pane.

Installing the HBA Driver 2-15

2