EMC QLA22xx, QLA23xx manual Problem, EMC Support. Windows 2003 driver 8.2.2.20 and later already

			Troubleshooting
	Solution Upgrade to the latest HBA driver. This was corrected for Windows
		2000 in 8.2.2.25 and later drivers. The 8.2.2.25 driver is available from
		EMC Support. Windows 2003 driver 8.2.2.20 and later already
		contain this correction.
Problem		EMC Primus case emc69308 — Direct-connect to EMC CLARiiON
		CX200 reports incorrect queue full error messages. Even under light
		I/O, a host may log a message noting that disk has reached a
		queue-full state similar to the following in the Windows event
		viewer:

Event ID: 11

Source: ql2300

Description: The driver detected a controller error on \Device\Scsi\ql2300x.

Data (words): offset 34 = F003001C [ErrorCode: Target device queue full].

Problems and Solutions B-3

B