GS700TS Smart Switch Software Administration Manual

Figure 3-10

The SNMPv1/v2 Trap Configuration screen contains the following fields:

Recipients IP – Enter the IP address to which the traps are sent.

Notification Type – (Configurable only if the Notification Version is SNMPv2.) Select the type of notification sent. The possible field values are:

Traps – Indicates Traps are sent.

Informs – Informs are sent only when SNMPv2 is enabled.

Community String – Enter the community string of the trap manager.

Notification Version – Select the trap type. The possible field values are:

SNMPv1 – Indicates SNMP Version 1 traps are sent.

SNMPv2 – Indicates SNMP Version 2c traps are sent.

UDP Port – Enter the UDP port used to send notifications. The default UDP port is 162.

Timeout – Enter the amount of time (in seconds) the device waits before re-sending informs. The default is 15 seconds.

Retries – Enter the maximum amount of times the device re-sends an inform request if a response is not received. The default is 3 times.

2.Select the trap entry.

3.Enter the fields in the first row.

4.Click APPLY to update the device.

3-21

Managing System Settings

v1.0, June 2009

Page 56
Image 56
NETGEAR GS748TS manual GS700TS Smart Switch Software Administration Manual