
GS700TS Smart Switch Software Administration Manual
–AutoAdvertise – Advertises the device’s current IP address as the management IP address.
•Notification – Select the topology change notification status on the interface.
–Enable – Enables topology change notification on the interface. This is the default value.
–Disable – Disables topology change notification on the interface.
•Optional TLVs – Select whether optional TLVs are advertised from the interface.
–Enable – Enables optional TLVs on the interface. This is the default value.
–Disable – Disables optional TLVs on the interface.
2.Select the Interface to configure.
3.Select the Admin Status from the list in the provided field in the first row.
4.Select the Management IP Address from the list in the provided field in the first row.
5.Select the Notification status from the list in the provided field in the first row.
6.Select the Optional TLVs status from the list in the provided field in the first row.
7.Click APPLY to update the device.
LLDP-MED Network Policy
The
LLDP Media Endpoint Discovery
LLDP:
•Provides detailed network topology information, including what devices are located on the network, and where the devices are located. For example, what IP phone is connected to what port, what software is running on what switch, and what port is connected to what PC.
•Automatically deploys policies over networks for:
–QoS Policies
–Voice VLANs
•Provides Emergency Call Service
Managing System Settings |