GS700TS Smart Switch Software Administration Manual
•Number of Rules – Displays the current number of rules in the ACL.
IPv4 Rules
The IPv4 Rules screen allows an IP Rule to be defined within a configured ACL. Rules can be added only if the ACL is not bound to an interface.
To define IPv4 Rules:
1.Click Security > ACL > IPv4 Rules. The IPv4 Rules screen displays:
Figure
The IPv4 Rules screen contains the following fields:
IPv4 Rules
•ACL Name – Select the ACL Name from the list
IPv4 Rules Table
•Priority – Enter the rule priority. When the packet is matched to a rule, user groups are either granted permission or denied device management access. The rule number is essential to matching packets to rules, as packets are matched on a
•Protocol ID – Enter the protocol in the rule to which the packet is matched.
•Source IP Address – Enter the source IP Address.
•Source Mask – Enter the mask of the new source IP address.
•Destination IP Address – Enter the destination IP address.
•Destination Mask – Enter the mask of the new destination IP address.
Managing Security |
