
GS700TS Smart Switch Software Administration Manual
•TLV Advertised Interval – Enter the rate in seconds at which LLDP advertisement updates are sent. The possible field range is 5 - 32768 seconds. The default value is 30 seconds.
•Topology Change Notification Interval – Displays the amount of time that has elapsed since the bridge was initialized or reset or the last topology change that occurred. The time is displayed in a
•Hold Multiplier – Enter the amount of time that LLDP packets are held before the packets are discarded, measured in multiples of the TLV Advertised Interval. The possible field range is 2 - 10. The field default is 4. For example, if the TLV Advertised Interval is 30 seconds and the Hold Multiplier is 4, then the LLDP packets are discarded after 120 seconds.
•Reinitializing Delay – Enter the amount of time in seconds that passes between disabling and reinitializing LLDP. The possible field range is 1 - 10 seconds. The field default is 2 seconds.
•Transmit Delay – Enter the amount of time in seconds that passes between successive LLDP frame transmissions due to changes in the LLDP local systems MIB. The possible field value is 1 - 8192 seconds. The field default is 2 seconds.
LLDP-MED Properties
•Fast Start Duration – Enter the number of times LLDP packets are sent when the LLDP- MED Fast Start mechanism is initialized, which occurs when a new Endpoint device links with the
2.Select the LLDP global status on the device by selecting Enable or Disable in the LLDP field.
3.If you selected Disable in the LLDP field, select the type of LLDPDU Handling from the list in the provided field.
4.If you selected Enable in the LLDP field, enter the TLV Advertised Interval, Hold Multiplier, Reinitializing Delay, Transmit Delay and Fast Start Duration in the provided fields.
5.Click APPLY to update the device.
Advanced
The LLDP Advanced menu contains the following options:
•“LLDP Configuration”
•“LLDP Port Settings”
Managing System Settings |