GS700TS Smart Switch Software Administration Manual

There are two operational modes for IP Phones:

IP phones are configured with VLAN-mode as enabled, ensuring that tagged packets are used for all communications.

If the IP phone’s VLAN-mode is disabled, the phone uses untagged packets. The phone uses untagged packets while retrieving the initial IP address through DHCP. The phone eventually uses the Voice VLAN and starts sending tagged packets.

The Voice VLAN menu contains the following options:

“Basic”

“Advanced”

Basic

The Voice VLAN Basic menu contains the following options:

“Properties”

Properties

The Voice VLAN Basic Properties screen contains information about Voice VLAN on the device, including the ports enabled and included in the Voice VLAN.

To define Voice VLAN settings:

1.Click Switching > Voice VLAN > Basic > Properties. The Voice VLAN Basic Properties screen displays:

Figure 4-16

Configuring Switching Settings

4-22

v1.0, June 2009

Page 115
Image 115
NETGEAR GS748TS manual Basic, Properties