GS700TS Smart Switch Software Administration Manual

The LACP Configuration screen contains the following field:

LACP System Priority – Enter the system priority value. The field range is 1-65535. The field default is 1.

2.Enter the LACP System Priority in the provided field.

3.Click APPLY to update the device.

LACP Port Configuration

The LACP Port Configuration screen provides information and parameters for configuring the LACP Priority and Timeout fields on interfaces.

To configure LACP port priority:

1.Click Switching > LAG > Advanced > LACP Port Configuration. The LACP Port Configuration screen displays:

Figure 4-9

The LACP Port Configuration screen contains the following fields:

Interface – Displays the interface number to which timeout and priority values are assigned.

LACP Priority – Enter the LACP port priority value. The field range is 1-65535.

Timeout – Select the administrative LACP timeout. The possible field values are:

Long – Indicates a long timeout value (90 seconds).

Short – Indicates a short timeout value (3 seconds). This is the default.

4-13

Configuring Switching Settings

v1.0, June 2009

Page 106
Image 106
NETGEAR GS748TS manual Lacp Port Configuration