•Idle Timeout – Enter the amount of time (minutes) that elapses before an idle station is timed out. Idle stations that are timed out must login to the system. The field range is 5 - 30 minutes. The field default value is 10 minutes.
•Base MAC Address – Displays the MAC Address. If the device is in stack mode, the Base MAC Address of the master unit is displayed.
•Serial Number – Displays the device serial number.
•Unit Mode – Indicates if the device is currently in standalone or stacking mode.
•Change Unit Mode To... After Reset – Toggle the device unit mode from the current value of Unit Mode to the value indicated by Stack or Standalone after resetting the device.
•Jumbo Frames Status – Displays the Jumbo Frame status.
•Jumbo Frames After Reset – Select the Jumbo Frame status. The possible field values are:
–Enable – Enables Jumbo Frames.
–Disable – Disables Jumbo Frames. This is the default value.
The Versions Table displays the following fields:
•Unit No. – Displays the stacking member’s current number. Possible values are
•Model Name – Displays the device model name.
•Hardware Version – Displays the installed device hardware version number.
•Boot Version – Displays the current boot version running on the device.
•Software Version – Displays the installed software version number.
2.Enter the System Name, System Location, System Contact and Idle Timeout in the provided fields.
3.If the displayed Unit Mode needs to be changed, check the Change Unit Mode box.
4.Select whether to enable or disable Jumbo Frames After Reset.
5.Click APPLY to update the system settings.
6.If you selected the Change Unit Mode box, you must reset the device for the new unit mode setting to take effect. See “Reset” for detailed instructions on resetting the device.
