GS700TS Smart Switch Software Administration Manual
–Force Master – Forces the selection of a Stacking Master. This causes the new Master unit to take control of the current configuration of the Stack. The old Master is reset and becomes the Secondary Master. Note that only Unit 1 or Unit 2 can be the Stacking Master.
2.Select the Master Election mode.
3.If you selected Force Master, select either 1 or 2 from the stack list.
4.Click APPLY to update the device.
5.Reset the device for the new settings to take effect. See “Reset” for detailed instructions on resetting the device.
Stack Management
The Stack Management screen allows network managers to assign specific Unit numbers to stacking members or enable the software to automatically assign Unit numbers. Assignments take effect after reset.
To configure Stack Management:
1.Click System > Stacking > Advanced > Stack Management. The Stack Management screen displays:
Figure
The Stack Management screen contains the following fields:
•Unit No. – Displays the stacking member’s current Unit number. Possible values are
Managing System Settings |
