GS700TS Smart Switch Software Administration Manual

Guest VLAN – Select whether the Guest VLAN is enabled or disabled on the port. The default VLAN cannot be defined as a Guest VLAN. The possible field values are:

Enable – Enables using a Guest VLAN for the unauthorized port. If a Guest VLAN is enabled, the unauthorized port automatically joins the VLAN selected in the VLAN List field.

Disable – Disables the Guest VLAN on the port. This is the default value.

Periodic Reauthentication – Select whether periodic port reauthentication is enabled or disabled. The possible field values are:

Enable – Enables periodic port reauthentication.

Disable – Disables port reauthentication. This is the default value.

Reauthentication Period – Enter the time span (in seconds) in which the selected port is reauthenticated. The field default is 3600 seconds.

Authenticator State – Displays the port authentication status. The possible field values are Initialize, Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth and ForceUnauthNew.

Quiet Period – Enter the number of seconds that the device remains in the quiet state following a failed authentication exchange. The possible field range is 0-65535. The field default is 60 seconds.

Resending EAP – Enter the amount of time (in seconds) that lapses before EAP requests are resent. The field default is 30 seconds.

Max EAP Requests – Enter the total amount of EAP requests sent. If a response is not received after the defined period, the authentication process is restarted. The field default is 2 retries.

Supplicant Timeout – Enter the amount of time (in seconds) that lapses before EAP requests are resent to the supplicant. The field default is 30 seconds.

Server Timeout – Enter the amount of time (in seconds) that lapses before the device re- sends a request to the authentication server. The field default is 30 seconds.

Termination Cause – Displays the reason port authentication was terminated. The possible field values are Supplicant logoff, Port failure, Supplicant restart, Reauthentication failed, Force unauthorized, Port reinitialize, Port admin disabled and Undefined.

2.Select the interface.

6-14

Managing Security

v1.0, June 2009

Page 176
Image 176
NETGEAR GS748TS manual GS700TS Smart Switch Software Administration Manual