GS700TS Smart Switch Software Administration Manual

1.Click Security > ACL > IPv6 Rules. The IPv6 Rules screen displays.

2.Select the ACL Name from the list in the provided field.

3.Select the rule entry.

4.Click DELETE to remove the entry.

IPv6 Binding Configuration

The IPv6 Binding Configuration screen contains information for mapping ACLs to IPv6 interfaces. When an ACL is bound to an interface, all the ACE rules that have been defined are applied to the selected interface. Whenever an ACL is assigned on a port, LAG or, VLAN, flows from that ingress interface that do not match the ACL are matched to the default rule, which is Drop unmatched packets.

To bind interfaces to an ACL:

1.Click Security > ACL > IPv6 Binding Configuration. The IPv6 Binding Configuration screen displays:

Figure 6-20

The IPv6 Binding Configuration screen contains the following fields:

IPv6 Binding Configuration

ACL Name – Select the ACL Name for viewing and modifying ACL bound interfaces.

Port Selection Table

Port Number (1-XX)– Displays the bound and unbound ports on the device.

2.Select the interfaces for which the ACLs are bound.

6-32

Managing Security

v1.0, June 2009

Page 194
Image 194
NETGEAR GS748TS manual IPv6 Binding Configuration