GS700TS Smart Switch Software Administration Manual
–Enable – Reactivates the suspended LAG.
–Disable – Does not reactivate the suspended LAG.
•Type – Displays the LAG type. The possible field values are:
–Static – Indicates the LAG is configured manually.
–LACP – Indicates the LAG is configured automatically.
•Speed – Select the data transmission rate for the LAG. The LAG type determines what speed setting options are available. The possible field values are:
–10M – Indicates the LAG is currently operating at 10 Mbps.
–100M – Indicates the LAG is currently operating at 100 Mbps.
–1000M – Indicates the LAG is currently operating at 1000 Mbps.
•Duplex Mode – Displays the duplex mode of the LAG. The possible field values are:
–Full – Indicates the interface supports transmission between the device and its link partner in both directions simultaneously.
–None – Indicates Duplex mode is not enabled on the LAG.
•Auto Negotiation – Select the auto negotiation status of the LAG. Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate and flow control abilities to its partner. Auto Negotiation is enabled by default. The possible field values are:
–Enable – Enables auto negotiation.
–Disable – Disables auto negotiation.
•Flow Control – Select the flow control status of the LAG. Operates when the LAG is in full duplex mode. Flow Control is disabled by default. The possible field values are:
–Enable – Enables flow control.
–Disable – Disables flow control.
2.Select the interface.
3.Enter or modify the fields in the first row.
4.Click APPLY to update the device.
Configuring Switching Settings |
