GS700TS Smart Switch Software Administration Manual

Figure 5-1

The CoS Global Configuration screen contains the following:

QoS Status – Select whether QoS is enabled or disabled on the device. The possible values are:

Enable – Enables QoS globally. This is the default value.

Disable – Disables QoS globally.

QoS Mode – Select whether basic or advanced mode is enabled on the device. The possible values are:

Basic – Indicates that basic QoS mode is enabled on the device. Basic CoS mode allows the user to classify frames into broad classes, by the ingress interface or by the value of a single frame header field. Each class can be directed to a desired egress queue, and the user can also configure the queue servicing parameters.

Advanced – Indicates that advanced QoS mode is enabled on the device. In Advanced mode the user has access, and must explicitly configure all aspects of all CoS/QoS facilities in use. Traffic may be classified into broad classes or fine-grained flows. Selecting the Advanced option disables the Trust Mode field.

5-3

Configuring QoS

v1.0, June 2009

Page 152
Image 152
NETGEAR GS748TS manual GS700TS Smart Switch Software Administration Manual