
GS700TS Smart Switch Software Administration Manual
2.Select either Strict Priority or WRR to specify the traffic scheduling method.
3.Click APPLY to update the device.
Bandwidth
After packets are assigned to a queue, a scheduling scheme can be assigned to an interface, using either:
•Committed Burst Size – Indicates the maximum number of data bits transmitted within a specific time interval.
•Committed Information Rate – Indicates the rate that data is transmitted. The rate is averaged over a minimum time increment.
The Bandwidth screen allows the network manager to define Ingress Rate Limit and Egress Shaping Rates.
To define bandwidth settings:
1.Click QoS > CoS > Basic > Bandwidth. The Bandwidth screen displays:
Figure
The Bandwidth screen contains the following fields:
•Interface – Displays the ports for which the bandwidth settings are displayed.
•Ingress Rate Limit Status – Select whether rate limiting is defined on the interface. The possible field values are:
– Enable – Enables ingress rate limiting on the interface.
Configuring QoS |