GS700TS Smart Switch Software Administration Manual

Root Port – Displays the port number that offers the lowest cost path from this bridge to the Root Bridge. This field is significant when the bridge is not the Root Bridge. The current root port is zero when the device is not connected to the network.

Root Path Cost – Displays the cost of the path from this bridge to the Root Bridge. The current root path cost is zero when the device is not connected to the network.

MSTP Status

MST ID – Specifies the instance to which the VLAN is assigned.

VID – Displays the VLAN ID.

2.Enter the Bridge Priority in the provided field.

3.Select Hello Time, Max Age, Forward Delay or Spanning Tree Maximum Hops and enter the value in the provided field.

4.Click APPLY to update the device.

CST Port Configuration

The CSP Port Configuration screen contains parameters for assigning Common Spanning Tree (CST) values to interfaces.

To configure CST ports on the device:

1.Click Switching > STP > Advanced > CST Port Configuration. The CST Port Configuration screen displays:

Figure 4-23

4-35

Configuring Switching Settings

v1.0, June 2009

Page 128
Image 128
NETGEAR GS748TS manual Mstp Status, CST Port Configuration