i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
2.8Remote Bridge Configuration
The airHaul2 Nexus PRO units can also be configured to operate as a Remote device to associate with a Root Bridge.
2.8.1 Bridge IP Configuration
The Ethernet IP is configured during the operational mode change to Remote Bridge mode.
Follow these steps below if you need to
1.From the Summary Information page, click on the Bridge IP Configuration link to change Ethernet parameters.
2.Enable or disable the DHCP by clicking the check box. Enter the ‘IP Address’, ‘IP mask’, ‘Gateway’ for non DHCP. Assign the unit a unique IP Address with the same IP subnet (e.g. 192.168.0.100) as the Root device it will be associated to.
3.Click on the ‘Apply Changes’ button to change the settings.
Figure 2-36 Remote Bridge Ethernet Configuration
airHaul2 Nexus PRO™ User Guide | Page 52 of 113 |
|
