i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
2.7.2 Wireless Configurations
The wireless parameters need to be configured for the Root Bridge device to communicate with other airHaul2 Nexus PRO Remotes.
Follow the steps below to change the Root Bridge Wireless Configurations:
1.From the Summary Information page, click on the Wireless IP Configuration link of the Radio that needs to be configured as Root Bridge, or go to menu bar and from the Radio dropdown menu select the particular radio that needs to be configured with the wireless settings in the Root Bridge Mode.
2.The Radio Configuration page will appear. Click on the Wireless Settings link.
3.Enter the SSID of the unit and select whether the SSID Broadcast has to Enabled/Disabled.
4.Select the Domain and the Channel.
5.Select the Transmit power of the radio from
6.Select the gain of the antenna from the dropdown menu according to the gain of the antenna being used with the equipment.
7.Enter the RF cable loss based on the cable specifications.
8.Click on the Apply Changes button to change the settings.
Figure 2-31 Root Bridge Wireless Settings
airHaul2 Nexus PRO™ User Guide | Page 44 of 113 |
|
