Page 56 of 113
intelligent wireless platform
airHaul2 Nexus PRO™ User Guide
2.9.2 Wireless Configuration
The wireless parameters need to be configured to allow the Remote Router/NAT airHaul2 Nexus PRO
unit to associate with the Root Bridge unit.
Follow these steps below to configure the Remote Router/NAT Mode Wireless IP Settings
parameters:
1. Click on the ‘Wireless IP Configuration’ link from the ‘Summary Information’ page.
2. Enter the wireless ‘IP address’, ‘IP Mask’ and ‘Gateway IP’ address for the airHaul2 Nexus
PRO unit.
3. Check the ‘Enable DHCP’ checkbox to obtain an IP address automatically from network.
4. Click on the ‘Apply Changes’ to change the settings.
Figure 2-41 Remote Router/NAT Wireless IP Configuration