|
|
| i n t e l l i g e n t | w i r e l e s s | p l a t f o r m | |
|
|
|
|
|
|
|
| Page Item |
| Descriptions |
|
|
|
|
|
|
|
|
| |
|
|
| According to the IEEE 802.11 standard specification, a single frame |
| ||
|
|
| combining a plurality of information can be transmitted. For example, |
| ||
|
|
| the frame may carry data+acknowledgement (ACK), data+poll , data+ |
| ||
|
|
| ACK +poll or ACK +poll for transmission. |
|
| |
|
|
| Using the piggy back increases the communication efficiency, |
| ||
|
|
| depending on the transfer medium or size of data being transferred. |
| ||
|
|
| Note: It can be used for improved performance with compatible |
| ||
|
|
| devices. (May not be compatible with third party devices). |
| ||
|
|
|
|
| ||
| Radio Operating |
| sB Enhanced Mode gives better performance with the compression | |||
|
| option. For this reason, it does not support 802.11b. |
|
| ||
| mode |
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
| ||
|
|
| The Throughput Optimizer is used to optimize the radio link speed | |||
|
|
| and performance. |
|
|
|
|
|
| The valid range is 0 to 10. The default value is 6. |
|
| |
| Throughput |
| Setting a higher value will cause the radio to attempt to establish at |
| ||
|
| the highest possible data rate | in an aggressive way. A smaller |
| ||
| Optimizer |
|
| |||
|
| "Throughput Optimizer" value means a more stable link. |
|
| ||
|
|
|
|
| ||
|
|
| Note: The default value for the Throughput Optimizer is 6. Vary the |
| ||
|
|
| Throughput Optimizer settings to achieve a more stable link. |
| ||
|
|
|
|
|
|
|
Follow the steps below to change the Radio Performance:
1.From the Radio Configuration page click on the Performance link.
2.Enter the Fragment Length.
3.Input the desired RTS/CTS Length.
4.Choose the Preamble Settings from the dropdown list.
5.Enter the Distance of the Remote Device.
6.Turn ON/OFF Frame Bursting.
7.Turn ON/OFF Concatenation.
8.Turn ON/OFF Piggy Back.
9.Choose the desired Radio Operating Mode
10.Select an appropriate value for the Throughput Optimizer.
11.Click on the Apply Changes button to effect the changes.
airHaul2 Nexus PRO™ User Guide | Page 74 of 113 |
|
