Page 18 of 113
intelligent wireless platform
airHaul2 Nexus PRO™ User Guide
2.4. Navigation Menu Bar The Navigation Menu Bar contains menu items that allow the user to go to different configuration
pages. The following table summarizes the functions available for each of the menu item links.
Table 2-2 Menu Functions
Menu Item Menu Sub-items Description
Home Summary Information Displays summary page with
information such as Bridge IP and
Wireless IP settings.
Allows user to set the IP settings for
Ethernet (wired side) and Wireless
interfaces depending on the device
operational mode.
Bridge Configuration Displays the bridge address, generic
bridge port table, spanning tree port
table for ports ETH A, ETH B, Radio A.,
Radio B etc.
Bridge configuration option is available
when airHaul2 Nexus PRO is configured
in Root Bridge or Remote Bridge mode
DHCP Server Configure DHCP server or Relay
DHCP option is available only if airHaul2
Nexus PRO is configured in Remote
Router/NAT mode
Networking
Traffic Statistics Displays the Ethernet and Wireless
Traffic Statistics
Bandwidth Controller Allows bandwidth management of the
wireless link on egress traffic.
Routing Table Allows user to view, add and delete
static routes.
Routing table is available for all the
operating modes.
QoS The primary goal of QoS is to provide
priority including dedicated bandwidth,
controlled jitter and latency (required by
some real-time and interactive traffic),
and improved loss characteristics.
Radio Radio A
Radio B
Wireless Settings:
Allows user to set SSID, Channel,
ACL Controls and Country, as well
as Dial-a-Power.