Page 53 of 113
intelligent wireless platform
airHaul2 Nexus PRO™ User Guide
2.8.2 Wireless Configuration The wireless parameters need to be configured to allow the Remote Bridge airHaul2 Nexus PRO unit
to associate with the Root Bridge unit.
Follow these steps below to configure the Remote Bridge Mode wireless association parameters:
1 Go to the menu bar and from the Radio dropdown menu, select the particular radio that has
to be configured with the wireless settings in the Remote Bridge Mode.
2 Enter the SSID of the Root Bridge airHaul2 Nexus PRO unit.
3 Enter the radio MAC address of the Root Bridge airHaul2 Nexus PRO unit.
4 Choose a radio domain from the drop down list.
5 Choose a radio channel to associate the client with the root device.
6 Select the Transmit power of the radio from Dial-a-Power dropdown menu
7 Select the gain of the antenna from the dropdown menu as per the gain of the antenna being
used with the equipment.
8 Enter the RF cable loss based on the cable specifications
9 Click the Apply Changes. The units will attempt to associate.
Note: Clicking on ‘Status’ will display further details on the association
Figure 2-37 Remote Bridge Wireless Settings