CLEAN AIR FILTER

Air Filter

Cover

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Line

Air Filter

Screws

Fuel Filter

CHECK MUFFLER MOUNTING SCREWS

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

1.Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed, nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

Once each year, ensure muffler mounting screws are secure and tightened properly to

prevent damage.

Mounting

 

 

Screw

Muffler Cover

Holes

 

Screws

1.Loosen and remove the 2 screws from the muffler cover.

2.Remove the muffler cover.

3.Tighten the 2 muffler mounting screws se- curely.

4.Reinstall muffler cover and 2 screws. Tighten securely.

CARBURETOR ADJUSTMENTS

There is no screw for idle adjustment on your blower. The throttle lever is used to control engine speed. The throttle lever can be placed in one of four positions: STOP, IDLE

or , FULL THROTTLE or

, and one

intermittent position. If your engine will not run properly or you require further assistance, contact an authorized service dealer or call 1--800--554--6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

-- 10 --

Page 9 Page 11
Page 10
Image 10
Poulan PBV200 LE instruction manual Storage
Page 9 Page 11

PBV200 LE specifications

The Poulan PBV200 LE is a powerful and versatile leaf blower designed for homeowners and professionals alike, making outdoor maintenance tasks more efficient and hassle-free. With its robust engine and thoughtful design, this blower stands out in a crowded market, appealing to those looking for both performance and ease of use.

One of the key features of the PBV200 LE is its 200cc engine, delivering an impressive airflow speed of up to 200 mph. This robust engine not only provides strong suction and blowing performance, but it also ensures a quicker clean-up of leaves, grass clippings, and other debris, making yard work a breeze. The engine is designed with a focus on fuel efficiency, allowing users to work for extended periods without frequent refueling.

In terms of ergonomics, the PBV200 LE showcases a lightweight design, making it easy to maneuver around the yard. Weighing in at just 11.5 pounds, it minimizes user fatigue during extended use. The blower also features an adjustable handle and padded straps, allowing for a customized fit that ensures comfort and stability, even during long durations of operation.

The technology incorporated into the PBV200 LE enhances its usability. An easy-start system enables quick ignition, while the low-vibration function reduces user fatigue and increases control, allowing for precise maneuvering. Additionally, the blower features a vacuum and mulching function, which allows for dual-use applications. This versatility not only saves time but also promotes efficient yard waste management by shredding leaves into mulch.

Not to be overlooked is the PBV200 LE's environmentally friendly design. It meets or exceeds EPA emissions standards, providing peace of mind to users who are conscious of their environmental footprint. This commitment to sustainability without sacrificing performance makes it an ideal choice for eco-conscious homeowners.

With its combination of power, comfort, and eco-friendly design, the Poulan PBV200 LE is a reliable leaf blower that meets the demands of outdoor cleaning tasks. Whether tackling seasonal leaf fall or maintaining garden spaces, this model delivers exceptional performance and convenience that enhances any landscaping strategy.
Top Page Image Contents