ON/OFF SWITCH

The ON/OFF switch is located on the trigger handle and is used to stop the engine. Move the switch to the OFF position to stop the engine.

PRIMER BULB

The PRIMER BULB removes air from the car- buretor and fuel lines and fills them with fuel. This allows you to start the engine with fewer pulls on the starter rope. Activate the primer bulb by pressing it and allowing it to return to its original form.

START LEVER

The START LEVER helps to supply fuel to the engine to aid in starting. Activate the starting system by moving the start lever to the START position. DO NOT squeeze the throttle trigger until the engine has started and runs. After the engine starts, allow the engine to warm--up 10--15 seconds, then fully squeeze the throttle trigger to deactivate the starting system.

COUPLER

The COUPLER enables optional attach- ments to be installed on the unit.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on un- leaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. Mix gaso- line and oil at a ratio of 40:1. A 40:1 ratio is ob- tained by mixing 3.2 ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. DO NOT USE automotive oil or marine oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container mo- mentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during stor- age. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, empty the fuel system before stor- age for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

See the STORAGE section for additional in- formation.

HOW TO STOP YOUR UNIT

S To stop the engine, move the ON/OFF switch to the OFF position.

ON/OFF

Switch

HOW TO START YOUR UNIT

WARNING: Avoid any contact with the muffler. A hot muffler can cause serious burns.

Starting position

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE

NOTE: DO NOT squeeze the throttle trigger until the engine has started and runs.

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move the start lever to the START posi- tion.

8

Page 7 Page 9
Page 8
Image 8
Poulan PP125 instruction manual ON/OFF Switch, Primer Bulb, Start Lever, Coupler, Before Starting Engine Fueling Engine
Page 7 Page 9

PP125 specifications

The Poulan PP125 is a lightweight and powerful gas-powered chainsaw designed for both homeowners and professionals looking to tackle various cutting tasks, including pruning, trimming, and light to medium-duty logging. Known for its reliability and efficiency, the PP125 has become a popular choice among users who seek a combination of performance, durability, and ease of use.

One of the standout features of the Poulan PP125 is its robust 25cc two-stroke engine. This engine delivers ample power for cutting through wood while maintaining fuel efficiency. The automatic oiler system ensures that the chain and bar receive continuous lubrication, extending their lifespan and improving cutting performance. The PP125 also comes equipped with a 12-inch bar and chain, ideal for handling smaller projects without sacrificing cutting capability.

The design of the Poulan PP125 emphasizes user comfort and control. Its lightweight build, weighing in at around 8 pounds, makes it easy to maneuver and reduces operator fatigue during extended use. Additionally, the chainsaw features an ergonomic handlebar and a wrap-around front handle, allowing for multiple grip positions and better handling during cutting tasks. Safety features like a chain brake provide added peace of mind by stopping the chain in the event of kickback.

An important technology integrated into the PP125 is the Easy Start system, designed to minimize the effort required to start the engine. This feature reduces the likelihood of flooding and helps ensure quick, reliable starts even in colder weather. The tool-less chain tensioning system allows users to make adjustments easily, ensuring optimal chain tension without the need for additional tools.

The Poulan PP125 is also designed with maintenance in mind. The air filter is easily accessible, facilitating simple cleaning and replacement, which helps keep the engine running smoothly. The chainsaw’s durable construction ensures it can withstand the rigors of outdoor use, making it a dependable choice for both light and moderate cutting tasks.

In summary, the Poulan PP125 offers a well-rounded package for users seeking a dependable chainsaw. Its lightweight design, powerful engine, user-friendly features, and attention to safety make it an excellent option for anyone looking to effectively manage their outdoor cutting needs. Whether you're a seasoned professional or a casual user, the PP125 stands out as a reliable tool in any toolkit.
Top Page Image Contents