Operating the Coupler, Operating Position

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL:

Edger . . . . . . . . . . . . . . . . . . . . . . . PP1000E Cultivator . . . . . . . . . . . . . . . . . . . . PP2000T Blower . . . . . . . . . . . . . . . . . . . . . . PP3000B Brushcutter . . . . . . . . . . . . . . . . . . PP4000C Pruner . . . . . . . . . . . . . . . . . . . . . . PP5000P

WARNING: Always stop unit anddis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH- MENT (OR OTHER OPTIONAL AT- TACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Upper Shaft

Coupler

Coupler Primary Hole

Guide Recess

Upper Locking/ Attachment

Shaft Release

Button

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit.

OPERATING INSTRUCTIONS

It is recommended that the engine not be operated for longer than 1 minute at full throttle.

OPERATING POSITION

Lower

LOOSEN

Attachment

TIGHTEN Knob

2. Press and hold the locking/release button.

Locking/Release Button

	Coupler	Upper Shaft
	Lower Attachment	Upper Shaft
	Lower Attachment

3.While securely holding the engine and upper shaft, pull the attachment straight out of the coupler.

INSTALLING OPTIONAL ATTACH- MENTS

1.Remove the shaft cap from the attach- ment (if present).

2.Position locking/release button of attach- ment into guide recess of coupler.

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

Cut from your left to your right.

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be throwninto eyes and face and cause blindness or other serious injury.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently whenthe engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool. Always release the throttle trigger and allow the engine to return to idle speed when not cutting. To stop engine:

SRelease the throttle trigger.

SMove the ON/OFF switch to the OFF posi- tion.

TRIMMER LINE ADVANCE

Thetrimmer line will advance approximately 2 inches (5 cm) each time the bottom of the trimmer head is tapped on the ground with the engine running at full throttle.

The most efficient line length is the maximum length allowed by the line limiter.

Always keep the shield in place when the tool is being operated.

PP136 specifications

The Poulan PP136 is a versatile and efficient chainsaw designed for both homeowners and professionals looking for a reliable tool for various cutting tasks. With its lightweight design and powerful performance, the PP136 stands out as an excellent choice for those who need a dependable chainsaw for trimming, pruning, and even cutting firewood.

One of the standout features of the Poulan PP136 is its 36cc engine, which provides ample power to tackle a variety of cutting jobs. The engine is designed to deliver optimal performance while maintaining fuel efficiency, making it an economical choice for regular use. The chainsaw is equipped with a 16-inch bar and chain, allowing users to cut through larger branches and logs with ease. The size strikes a perfect balance between maneuverability and cutting capacity, making it suitable for both light and moderate tasks.

The Poulan PP136 also incorporates several advanced technologies for enhanced user experience. It features an adjustable automatic oiler that ensures consistent lubrication to the chain, reducing wear and tear while maximizing the lifespan of the chain and bar. Another notable technology is the easy-start system, which minimizes the effort required to start the engine, enabling users to get to work quickly without the frustration of traditional starting mechanisms.

Safety is a top priority in chainsaw design, and the PP136 is no exception. It comes equipped with a chain brake that instantly stops the chain in case of kickback, reducing the risk of accidents. The cushioned handle reduces vibration during operation, providing increased comfort and improving control while cutting. This focus on safety and comfort makes the PP136 suitable for users of all skill levels.

Additionally, the chainsaw features a tool-less air filter cover, allowing for easy access and maintenance, which is critical for the longevity of the tool. The lightweight design of the chainsaw ensures that users can handle it with minimal fatigue, making it an ideal choice for longer cutting sessions.

Overall, the Poulan PP136 combines power, efficiency, and safety in a user-friendly package, making it a reliable tool for anyone in need of a practical chainsaw solution. Whether you are a seasoned professional or an occasional user, the PP136 provides the performance and reliability required for a wide range of cutting tasks.

Poulan PP136 Operating the Coupler, Operating Position, Installing Optional ATTACH- Ments

Models: PP136