![](/images/new-backgrounds/1175541/17554133x1.webp)
MAINTENANCE
CLEAN AIR SCREEN
Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.
ENGINE COOLING FINS (See Fig. 12)
Remove any dust, dirt or oil from engine cooling fins to prevent engine damage from overheating.
•Remove screws from blower housing and lift housing and dipstick tube assembly off engine.
•Cover oil fill opening to prevent entry of dirt.
•Use compressed air or stiff bristle brush to thoroughly clean engine cooling fins.
•To reassemble, reverse above procedure.
SCREWSBLOWER HOUSING
SCREWS
AIR SCREEN
OIL FILL
TUBE AS-
SEMBLY
| SPARK |
ENGINE COOLING FINS | PLUG |
|
FIG. 12
AIR FILTER (See Fig. 13)
Your engine will not run properly using a dirty air filter. Replace
Service air cleaner more often under dusty conditions.
•Pull up on air filter cover handle and rotate towards engine.
•Remove cover.
•Carefully remove air filter cartridge and
•Clean base carefully to prevent debris from falling into carburetor.
NOTE: If very dirty or damaged, replace cartridge.
•Place new
•Align tabs on cover with slots in blower housing and replace cover.
•Hook handle on cover and push down on handle to close.
IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean cartridge.
HANDLE
COVER
CARTRIDGE
BASE
TABS
SLOTS
FIG. 13
17