PowerDsine PD-6006, PD-6012, PD-6024 manual Port Indications, Power Status Indications

PD-6006/12/24

2.3.2Port Indications

One bi-color indicator (green and orange), per port, provides port status:

Green indicates that the terminal unit has been identified as "Power over LAN Enabled" and is active and receiving power. Orange indicates that the port is not supplying power and is not active.

Refer to Table 2-2 for additional information.

Note Due to the standard detection process performed on each PoL port, power will not be supplied to an Ethernet device, that is not PoL-enabled (indicated in orange or off). In this way, Ethernet devices (not PoL-enabled) will not be affected by this connection.

Table 2-1: Power Status Indications

Indicator	Color	Main Power	Remarks
		Status
		Internal power	Internal power supply voltage
	Off	supply unit is	is too low. All ports are
		unplugged or	disconnected.
		faulty.
AC		Indicates AC	Internal power supply voltage
	Green	power input	is within tolerance.
		active.
	Green	Internal power	All ports are disconnected.
		supply voltage is
	blinking
		out of tolerance.
	Off	No DC input	DC input voltage is too low.
		power available.	All ports are disconnected.
DC		Indicates DC	DC input voltage is within
	Green	power input	tolerance.
		active.
	Green	DC Input voltage	All ports are disconnected.
	blinking	is out of tolerance.
AC and DC	Orange	Internal problem	Built in Test (BIT) failed.
		alarm.
Power over LAN Solutions		9	Cat. No.: 06-6800-056