Important Safety Information

Safety Definitions

• Save these instructions

Safety Alert Symbols

The following symbols are used on the product and in this manual to alert the operator of potential safety hazards. Read them carefully, and understand their meaning.

 

 

 

 

 

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

 

DANGER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

 

WARNING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indicates a potentially hazardous situation which, if not avoided, may result in minor/moderate injury or

 

CAUTION

 

 

 

 

 

equipment/property damage.

 

 

 

 

 

 

 

 

 

 

 

The following symbols can be found on your tiller. Carefully read and understand their meaning.

Safety Warning Symbols

 

 

 

 

 

Indicates WARNING, DANGER, or CAUTION.

 

 

 

 

 

 

 

 

 

 

Wear eye protection complying with ANSI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Z87.1 and hearing protection.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Read operator’s manual before operating this

 

 

 

 

 

 

 

 

 

 

Disconnect spark plug wire when not in use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

machine. Failure to follow directions could

 

 

 

 

 

 

 

 

 

 

or before servicing, cleaning, or performing

 

 

 

 

 

result in serious injury.

 

 

 

 

 

 

 

 

 

 

maintenance on the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Thrown objects. Remove all rocks, stones,

 

 

 

 

 

 

 

 

 

 

Engine exhaust contains carbon monoxide,

 

 

 

 

 

and foreign objects which could be thrown by

 

 

 

 

 

 

 

 

 

 

an odorless and deadly gas. NEVER run unit

 

 

 

 

 

machine

 

 

 

 

 

 

 

 

 

 

indoors or in a poorly ventilated area.

 

 

 

 

 

Do not use if children or bystanders are present.

 

 

 

 

 

 

 

 

 

 

Do NOT touch hot muffler or cylinder. These

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

parts are extremely hot from operation and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

may remain hot for a short time after operation.

 

 

 

 

 

Rotating tines can cause serious injury. Keep

 

 

 

 

 

 

 

 

 

 

To reduce risk of fire, clean spilled gas and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

oil and keep unit free from debris. Gasoline is

 

 

 

 

 

hands, feet, and clothing away.

 

 

 

 

 

 

 

 

 

 

extremely flammable. Allow machine to cool

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

before refueling.

Control and Operating Symbols

 

 

 

 

Oil Fill Location

 

 

 

 

 

 

Fuel ON/OFF Valve

 

 

 

 

Do Not Overfill

 

 

 

 

 

 

Move Fuel Valve lever to the right to

 

 

 

 

 

 

 

 

 

 

 

operate the tiller.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clutch Lever

 

 

 

 

 

 

Choke Lever

 

 

 

 

Depressing the upper lever engages

 

 

 

 

 

 

Move Choke Lever to the left for cold

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the tines and drive wheels for the till-

 

 

 

 

 

 

engine starting. Move Choke Lever to

 

 

 

 

ing operation. Depressing the lower

 

 

 

 

 

 

the right once engine is started or for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

engages the tines and drive wheels for

 

 

 

 

 

 

warm engine starting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

reversing the tiller.

 

 

 

 

 

 

 

 

 

 

 

Throttle Control

 

 

 

 

 

 

 

 

 

 

 

Move throttle lever to the left to in-

 

 

 

 

 

 

 

 

 

 

 

crease engine speed. Move throttle

 

 

 

 

 

 

 

 

 

 

 

lever to the right to decease engine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

speed.

 

 

 

 

 

 

 

Questions? Call Toll Free at 1-800-737-2112

1

Copyright © 2009 MAT Engine Technologies, LLC

Page 2
Image 2
Powermate P-RTT-196MD-[E] Safety Definitions, Safety Alert Symbols, Safety Warning Symbols, Control and Operating Symbols