Safety Decals (Continued)
• Save all instructions
Assembly
• Save all instructions
If you need assistance or find any parts missing, CALL TOLL FREE:
Read and follow the assembly instructions. Do not discard any parts or materials until the unit is assembled. References to the right or left side of the tiller are from the viewpoint of the operator’s position behind the tiller.
WARNING
Do not operate tiller if it is damaged or not completely and correctly assembled.
WARNING
Before doing any assembly or maintenance to the unit, remove the wire from the spark plug.
WARNING
Always wear ANSI compliant safety glasses with side shields while assembling the tiller.
The following components will be found in the carton. |
|
| |||
Quantities shown in ( ). | e. | (4) M8x60mm saddle bolts and washers for | |||
1. | (1) | Tiller | |||
f. | assembling upper handle | ||||
2. | (1) | Handle Assembly | (4) Handle knobs for assembling upper handle | ||
3. | (1) | Front Handle | g. | (2) Wheel locking pins | |
4. | (2) | Tine Assembly | h. | (4) M6x25mm flange head bolts, flat washers and lock | |
5. | (1) | Tine Guard Assembly | i. | nuts | |
6. | (1) | Depth Regulator | (2) M10x50mm bolts and lock nuts for assembling tines | ||
7. | (2) M10x50mm bolts and lock nuts for assembling | j. | (1) Detent pin | ||
8. | (1) | stationary side shields | k. | (4) M8 wing nuts for assembling rotating side shields. | |
Tiller Operator’s Manual |
|
| |||
9. | (1) | Engine Manual |
|
| |
10. | (1) | Bottle of SAE 30 Engine Oil |
|
| |
11. | (1) | Parts bag containing the following |
|
| |
| a. (1) Spark plug wrench |
|
| ||
| b. | (2) Combination wrenches |
|
| |
| c. (4) M8x25mm bolts, flat washers, lock nuts for |
|
| ||
|
| assembling front carry handle |
|
| |
| d. (2) M10x25mm flange head bolts, lock washers and |
|
| ||
|
| nuts for assembling lower handle |
|
| |
Questions? Call Toll Free at | 7 |
![Powermate P-RTT-196MD-[E] specifications Assembly](/prints/powermate-p-rtt-196md-e-p-rtt-196md/1167450/8.1080/assembly.1080.webp)