Assembly

• Save all instructions

 

If you need assistance or find any parts missing, CALL

 

 

 

 

 

TOLL FREE: 1-800-737-2112.

 

 

 

Read and follow the assembly instructions. Do not discard any parts or materials until the unit is assembled. References to the right or left side of the edger are from the viewpoint of the operator’s position behind the edger.

WARNING

Do not operate edger if it is damaged or not completely and correctly assembled.

WARNING

Before doing any assembly or maintenance to the unit, remove the wire from the spark plug.

WARNING

Always wear ANSI compliant safety glasses with side shields while assembling the edger.

The following components will be found in the carton.

Quantities shown in ( ).

1. (1) Edger

2. (1)

Edger Operator’s Manual

3. (1)

Upper Handle

4. (1)

Control Rod

5. (1)

Container of SAE 30 Engine Oil

6. (1)

Parts bag containing the following:

 

(2)

Hair Pins

 

(2)

Plastic Wing Nuts (M8)

 

(2)

M8x35mm Pipe Bolts

 

(1)

Wire Tie

 

(1)

Spark plug socket wrench w/ rod

 

 

A

How to Remove Edger from Carton

1.Remove all parts and packaging components.

2.Use a utility knife to cut all 4 vertical edges and lay the side panels flat around the edger.

3.Remove any remaining packaging.

4.Roll the unit out from the carton, and place on a hard level surface.

B How to Assemble the Handle

NOTE: Refer to Figure 2 when following steps below:

1.Assemble the upper handle to the lower handle with the

(2) pipe bolts and the (2) plastic wing nuts. Firmly hand- tighten the wing nuts.

2.Slide one end of the control rod into the hole of the Depth Control Lever. Secure with hairpin.

3.Slide the other end of the control rod through the hole of the wheel bracket arm. Secure with second hairpin.

4.Attach the recoil starter handle through the rope guide, by twisting it into position.

5.Remove the temporary insert from the engine flameout wire terminal.

6.Connect the flameout wires from the engine and handle. Use cable tie to secure loose wire to handle.

Questions? Call Toll Free at 1-800-737-2112

WARNINGDANGER

Flameout wires MUST be connected for correct engine operation. Failure to connect can result in serious injury.

Depth Control

 

Upper Handle

Lever

 

 

Recoil

 

Handle Flameout Wire

Starter

Hair Pin

Handle

 

 

 

Connection Terminal

 

Plastic

Engine Flameout Wire

 

Wing Nut

Pipe Bolt

 

Lower

 

Hair Pin

Handle

 

 

Control Rod

 

 

 

Wheel Bracket

 

 

Arm

Figure 2

 

 

6

Copyright © 2009 MAT Engine Technologies, LLC

Page 6 Page 8
Page 7
Image 7
Powermate P-WLE-0799-F2N specifications Assembly, Toll Free, How to Remove Edger from Carton, How to Assemble the Handle
Page 6 Page 8

P-WLE-0799-F2N specifications

The Powermate P-WLE-0799-F2N is a versatile and powerful generator designed to meet the diverse energy needs of homeowners and small businesses. Offering reliability and performance, the P-WLE-0799-F2N is ideal for both emergency backup power and recreational use.

One of the standout features of this generator is its robust engine, which delivers consistent and efficient power output. The generator is equipped with a reliable 7,000-watt peak and 5,500-watt continuous power capacity, providing enough energy to run essential appliances during outages or to power your tools and equipment at outdoor work sites.

The Powermate P-WLE-0799-F2N utilizes advanced inverter technology that ensures clean and stable power, making it safe for sensitive electronics such as laptops and smartphones. This technology reduces total harmonic distortion (THD), which is crucial for protecting delicate devices from damage.

Portability is another key characteristic of the P-WLE-0799-F2N. It features a compact design along with never-flat wheels and a folding handle, allowing users to transport the generator with ease. This makes it an excellent choice for camping trips, tailgating events, or any outdoor activity where power is needed.

The generator also comes with a user-friendly control panel that offers multiple outlets, including standard AC outlets and USB ports. This design provides versatility, enabling users to power several devices simultaneously while ensuring convenience and ease of use.

Safety is a priority for the Powermate P-WLE-0799-F2N, which includes features such as automatic low-oil shutdown and overload protection. These features safeguard the generator from potential damage, extending its lifespan and maintaining performance.

Another key benefit is the relatively quiet operation of the device, thanks to its sound-dampening technologies. With a noise level that is competitive compared to traditional generators, users can enjoy peace of mind without the disruptive sounds often associated with portable power solutions.

The Powermate P-WLE-0799-F2N is not only powerful and versatile but also designed with durability in mind, making it an excellent investment for anyone seeking a reliable source of portable power. Whether it's for emergency readiness, recreational use, or job site demands, this generator stands out as a dependable choice.
Top Page Image Contents