Introduction
This manual is provided by Powermatic covering the safe operation and maintenance procedures for a Powermatic Model 719T Tilting Table Hollow Chisel Mortiser. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance to instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.
Specifications
Model No | 719T |
Stock No | 1791264K |
Stock No – Mortiser only | 2474002T |
Stock No – Stand only | 6294235T |
Motor | TEFC, 1 HP, 1 PH, 115V/230V (Prewired 115V), 60Hz |
Spindle speed | 1725 RPM |
Table tilt | 0° to 35° |
Chisel capacity | 1/4" to 1" |
Chisel shank diameters | 5/8", 3/4", |
Maximum chisel stroke | |
Maximum head stroke | 6" |
Maximum chisel center to fence distance | 4" |
Chuck capacity | 1/2" |
Bushing size | 5/8", 3/4", |
Longitudinal table travel | |
Cross table travel | 4" |
Table size | 7" x |
Fence size | |
Base size | 14" x 16" |
Overall dimensions assembled | |
Weight - Mortiser | Net weight 230 lbs., Gross weight 242 lbs. |
Weight - Stand | Net weight 46 lbs., Gross weight 50 lbs. |
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6
