Introduction

This manual is provided by WMH Tool Group, Inc., covering the safe operation and maintenance procedures for a Model PF3-JR Stock Feeder. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance to instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Description

The PF3-JR Stock Feeder can be mounted to a table saw, shaper, jointer, etc., and will act as a “third hand” for the operator to smoothly feed workpieces through the auxiliary machine. The Stock Feeder has a continuous-duty motor and lubricated gearbox that transmit power through roller chain and sprockets to the feed rollers, providing superior positive feeding for all types of materials. The stand is fully adjustable with universal joints, and heavy locking mechanisms secure the feeder in horizontal, vertical or angled positions. The roller system is “maintenance-friendly” allowing you to replace a single roller if necessary, instead of a complete set.

Specifications

 

Model Number

PF3-JR

Stock Number

1790818

Approx. Length, with arm fully extended and handle installed (in.)

27-1/2

Width (in.)

11.8

Approx. Height, with handle installed (in.)

23-1/4

Column Diameter (in.)

1.6

Rollers

3 (synthetic rubber)

Roller Size (Diameter x Length) (in.)

3-1/8 x 1-3/16

Motor

TEFC, 0.25HP, 1Ph only, 115V, 60Hz

Rotation

Forward/Reverse

Number of Speeds

4

Speed Range (FPM)

13/26/33/62

Distance between Rollers (center to center) (in.)

4.32 to 3.34

Swing (deg.)

360

Vertical Movement (in.)

6.52

Horizontal Movement (in.)

9.8

Maximum Height of Rollers Parallel to Tabletop (in.)

6

Approximate Net Weight (lbs.)

71

Approximate Shipping Weight (lbs.)

75

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6

Page 6
Image 6
Powermatic PF3-JR operating instructions Introduction Description, Specifications