Specifications
Table 3. Battery
Configuration | 250 VA: (1) 12V or (2) 6V, 4.2 Ah internal battery(s) |
| 425 VA: (1) 12V, 7 Ah internal battery |
| 600 VA: (1) 12V, 9 Ah internal battery |
|
|
Voltage | 12 Vdc |
|
|
Type | Sealed, maintenancefree, valveregulated, leadacid |
|
|
Charging | 8 hours to 95% capacity with output fully loaded |
|
|
Monitoring | Advanced monitoring for earlier failure detection and warning |
|
|
Backup Time | 250425 VA: 3 minutes at full load; 5 minutes typical load |
| 600 VA: 2.5 minutes at full load; 5 minutes typical load |
|
|
Transfer Time | 4 ms typical |
|
|
Table 4. Weights and Dimensions
UPS Dimensions | 250 VA: 5.9 x 39.3 x 15.0 cm (2.3 x 15.5 x 5.9) |
|
| |||
(HxWxD) | x 14.8 | x 6.8 | ) | |||
| 425600 VA: 7.9 x 37.6 x 17.2 cm (3.1 |
|
| |||
UPS Weight | 250 VA: 3.0 kg (6.6 lb) |
|
|
|
|
|
| 425 VA: 4.2 kg (9.2 lb) |
|
|
|
|
|
| 600 VA: 4.3 kg (9.4 lb) |
|
|
|
|
|
|
|
|
|
|
|
|
Table 5. Environmental and Safety
| 120V Model | 230V Model |
|
| |
Operating Temperature | 0°C to 40°C (32°F to 104°F) | |
|
| |
Storage Temperature | ||
| If the UPS is stored, the batteries should be recharged every 6 months. | |
| If stored above 25°C (77°F), battery life is reduced and should be recharged more often. | |
|
| |
Ventilation | Air around the unit must be free of dust, chemicals, or other materials | |
| that corrode or contaminate. | |
|
| |
Relative Humidity | 595% RH noncondensing | |
|
| |
Audible Noise | Less than 40 dBA typical at one meter | |
(Normal mode) |
|
|
|
|
|
Surge Energy Rating | 450 joules |
|
|
|
|
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) | IEC |
|
|
|
Safety Conformance | UL 1778; UL 497A; | EN |
| CAN/CSA C22.2, No. 107.1 |
|
|
|
|
Safety Markings | UL, cUL | TUV/GS, CE |
|
|
|
EMC (Class B) | FCC Part 15, | EN |
|
|
|
12 | Powerware® 3110 User's Guide 05147486 B (English) Uncontrolled Copy |