Installation
3. Start the UPS by pressing the switch as shown in Figure 3
or Figure 4 on page 4. The Power indicator illuminates indicating that power is available from the UPS output receptacles.
The units beeps and the front panel LEDs illuminate several times. The green indicator remains on, indicating normal operation.
If the unit continues to beep, or if the green indicator is off even though input power is available from the wall outlet, see •Troubleshooting" on page 13.
NOTE Let the unit charge the battery for at least 3 hours. You may use the unit while the battery charges, but the battery backup runtime will be reduced until the battery is fully charged. This will take up to 8 hours after a full discharge while the UPS is fully loaded.
UPS Top and Side Panels
Figure 1 and Figure 3 identify features of the 120V Model (USA) units, with attached input line cord. Figure 2 and Figure 4 identify features of the 230V Model (European) units, which have a connector for the input line cord as well as different output receptacles.
Fault Indicator |
| Power Indicator | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Receptacles |
| Output Receptacles |
| ||
(Battery and Surge Protection) |
| (Surge Protection Only) |
Figure 1. 120V Model Top Panel
Powerware® 3110 User's Guide 05147486 B (English) Uncontrolled Copy | 3 |