INSTALLATION
EATON Powerware® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide S 164201726 Rev 1
www.powerware.com
25
2. Recommended. Remove the UPS battery tray (see Figure 5):
SRemove the UPS front cover (six screws).
NOTE A ribbon cable connects the control panel to the UPS. Do not pull on the cable or
disconnect it.
SPlace the front panel above the UPS.
SRemove the two battery retaining brackets (four screws).
SSlightly pull the battery tray, then lift it to extract it.
Figure 5. Removing the Battery Tray