INSTALLATION
5.Repeat Steps 3 and 4 for the other rail.
6.Tighten the assembly wing nuts on both rail assemblies.
C A U T I O N
The EBM is heavy [77 kg (170 lb)]. A minimum of two people are required to move the EBM.
7.Place the EBM on a flat, stable surface with the front of the EBM facing toward you.
8.If the mounting brackets are not already installed, align the two mounting brackets with the screw holes on the side of the EBM and secure with the supplied
9.Attach the EBM front cover:
Align the pins on the rear of the front cover with the openings in the EBM. Push the cover firmly into place. See Figure 6.
Screws
Mounting
Bracket
Figure 6. Installing the EBM Mounting Brackets
10.Slide the EBM into the rack.
18 | EATON Powerware® BladeUPS® EBM User's Guide S 164201650 Rev 2 www.powerware.com |
