Powerware none manual Securing the EBM Mounting Brackets

INSTALLATION

11.Secure the front of the EBM to the rack using two hex-head screws in each mounting bracket as shown in Figure 7.

Hex-Head

Screws

Figure 7. Securing the EBM Mounting Brackets

12.Attach the rear hold-down brackets to the rail and slide the brackets into the slots on the EBM rear panel (see Figure 8).

Rear Hold-Down

Bracket

Figure 8. Securing the Back of the EBM

EATON Powerware® BladeUPS® EBM User's Guide S 164201650 Rev 2 www.powerware.com 19