Coaxial | Tweeter | |
Extension | ||
|
Tweeter
Speaker
Wires
Mounting | Mounting |
Slots (qty 4) | Tabs (qty 4) |
CAUTION: Do NOT overtighten the tweeter assembly..
Now feed the tweeter speaker wires through the front center of the woofer (where the aluminum bullet was removed) As shown in the next illustration.. Align and thread the coaxial tweeter assembly on the threaded post in the center of the woofer.. Rotate the coaxial tweeter assembly clockwise until snug.. Connect the tweeter wires to the tweeter output from the crossover..
Threaded mounting post
Turn tweeter coaxial mount assembly clockwise
The tweeter is mounted at and angled relative to the woofer.. Before final woofer mounting, rotate the woofer so that the tweeter is pointed in the desired direction, typically towards the listener's ear location..
Surface mount (Straight or Angled)
The preparation of the mounting surface for the tweeter involves drilling three holes.. Two holes are for the mounting screws.. Their centers must be spaced15/16”
13
