Diagram 12
1.Remove the paper from the adhesive strip on the flywheel’sfoammountingpad.
2.Wipe the back of the magnet with a dry clean, soft cloth. Position it over the foam mounting pad on the flywheel and press it onto the adhesive strip. Check that it is securely mounted. See Diagram 12.
3.Wipe the base of the reed switch (the “base” is the side opposite the ++) with a clean cloth.
CAUTION: Check the alignment of the +’s on the reed switch with the magnet before adhering the reed switch onto the side rail mount. For the electronics to operate properly, the magnet can only pass over one of the +’s on the reed switch.
4.To check the alignment between the magnet and reed switch, move the flywheel slightly so that you can place the base of the reed switch onto the foam mounting pad. You should be able to see and read the positive (+) signs. Position the reed switch between the roller guard and deck so that the magnet passes over one of the “+” markings on the reed switch.
Important: If the magnet passes over both “++” on the reed switch, a false count or an erractic display can appear on the electric console.
page 15
