Precor 903 owner manual Assembly Procedures

904 Assembly Procedures

To install the 904 electronic console, take the following steps:

1.Remove the handrail clamp from its box. Take the long and shortscrewsoutofthehandrailclampusingyourfingersor a Phillips head screwdriver. Set the screws aside.

Diagram 6

2.Position the handrail clamp over the right handrail’s micro-adjustment knob as shown in Diagram 6. Place a hand on either side of the handrail clamp to gently pull it apart so that you can slide it onto the handrail’s foam grip and into position (about 8 inches above the base of the foam grip).

Important: Do not mount the clamp on the painted surface ofthehandrails.

page 9