Precor EFX 821 manual Attaching the side bolts

Assembling the EFX 19

3.Fasten the display console mount to each upright support by threading a buttonhead screw, washer, and split washer through opposite mounting holes. Check that the base fasteners are loose before installing the display console fasteners.

CAUTION: Make sure the display console mount screws are properly threaded into the inserts. Do not cross thread. The Precor Limited Warranty does not cover damage that occurs during installation.

Figure 6: Attaching the side bolts

4.Check alignments and thread the remaining four display console mount screws, four washers, and four split washers. Wrench tighten with a ³⁄₁₆-inch hex key so the assemblies come together, but leave room for adjustments.

5.When all fasteners are snug against the unit, begin at the base and alternately wrench tighten all fasteners. Follow the sequence from step 2 through step 5.