Precor EFX 821 Breaking in the Equipment, Verifying that the Heart Rate Display is Operational

Assembling the EFX 25

Verifying that the Heart Rate Display is Operational

To verify that the heart rate display is operational:

1.Hold on to a stationary handrail and step on the foot pedals.

2.When you are comfortably situated, begin pedaling. A pedaling speed above 40 strides per minute must be maintained for several seconds.

3.Grasp both touch-sensitive handrail grips on the stationary handrails.

4.Look at the HEART RATE display. After a few seconds, a number appears indicating your heart rate.

Note: If a number does not appear in the HEART RATE display, you may need to disassemble the unit and check the cable connection.

Breaking in the Equipment

Precor equipment does not require an actual break-in period. However, moving components such as belts, gears, and bearings can settle while the equipment is being stored or shipped. This can cause the equipment to operate with a small amount of roughness or noise when it starts up for the first time.

The equipment usually returns to smooth operation after a day or two of normal use. If it does not, contact your dealer for assistance. For more information, refer to Obtaining Service.