Precor EFX 821 manual Attaching the Caps and Upright Support Cover

Assembling the EFX 23

Attaching the Caps and Upright Support Cover

You will need the arm caps and foot covers to complete the following tasks.

To attach the caps and upright support covers:

1.Align the cut-out inside the link arm cap with the link arm mounting hole. Apply pressure to the cap until it snaps into place.

Figure 11: Attaching the link and pivot arm caps

2. Attach the pivot arm caps.

Figure 12: Attaching the upright support covers

3.Place one inner and one outer upright support cover around an upright support. Align each pair so the arrows on the covers point toward the front of the unit. Apply pressure to engage the inner cover protrusions with the outer cover screw holes.