4 | Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer |
Never leave the equipment unattended when it is plugged in. Unplug the equipment from its power source when it is not in use, before cleaning it, and before providing authorized service.
Note: The optional power adapter is considered a power source for
Use the power adapter provided with the equipment. Plug the power adapter into an appropriate, grounded power outlet as marked on the equipment.
Care should be taken when mounting or dismounting the equipment.
Read, understand, and test the emergency stop procedures before use.
Keep the power cord or optional power adapter and plug away from heated surfaces.
Route power cables so that they are not walked on, pinched, or damaged by items placed upon or against them, including the equipment itself.
Ensure the equipment has adequate ventilation. Do not place anything on top of or over the equipment. Do not use on a cushioned surface that could block the ventilation opening.
Assemble and operate the equipment on a solid, level surface.
Locate equipment at least 40 inches (1 meter) away from walls or furniture on either side of the equipment, and 40 inches (1 meter) away from objects behind the equipment. These standards should also be used when positioning equipment away from sources of heat, such as radiators, heat registers, and stoves. Avoid temperature extremes.
Keep equipment away from water and moisture. Avoid dropping anything on or spilling anything inside the equipment to prevent electric shock or damage to the electronics.
Do not operate electrically powered equipment in damp or wet locations.
Never operate this equipment if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or exposed to water. Call for service immediately if any of these conditions exist.
