Precor p20 manual Viewing the Odometer Informational Menu, To view the odometer informational menu

18 Operating and Maintaining the P20 Console

On self-powered equipment, the battery initializes when you begin working out. You must maintain a minimum rate of motion for the Welcome banner to appear. PEDAL FASTER (or the equivalent message depending on the equipment type) appears in the display when the battery is low or when the rate of motion drops below the minimum requirements.

Viewing the Odometer Informational Menu

Each piece of equipment provides information about its use, as well as its software version, serial number, usage log, and event log. In most cases, you will only access this information if directed to do so by Precor® Customer Support.

To view the odometer informational menu:

1.Press the following keys in the order presented. Reset (Pause/Reset on tread consoles)

Input Up

Enter

Note: Only two seconds are allowed between keypresses. If a key is not pressed, the console display returns to the Welcome banner.

2.Press Up or Down to navigate the menu.

3.Press GO to select a test.

4.Press Programs once to return to the Odometer menu or twice to return to the Welcome banner.

Odometer

The odometer tracks equipment usage by the number of units traveled. The Odometer Units and Values table provides information on how usage is tracked depending on the equipment type.

The odometer information updates under these conditions:

Every 30 minutes

At the end of a course

When an event occurs

If the course is terminated by turning off the power, then the odometer data for that workout is lost.