Precor p20 manual Weekly Maintenance, Monthly Maintenance

Maintenance 47

Weekly Maintenance

Perform the following maintenance tasks every week:

1.Disconnect the external power supply.

2.Clean the ramps and wheels with water or an approved cleaner.

3.Inspect the power cord to verify that it is not pinched under the equipment or between any two moving parts.

4.Clean the floor under the equipment using a vacuum cleaner or a damp mop.

5.When the floor is completely dry, reconnect the power.

6.Test all console functions, including heart rate monitoring features.

7.Verify that the unit sits squarely on the floor. All of its feet should be touching the floor and the unit should not rock or wobble when in use. If not, re-level it as described in Leveling the EFX.

Monthly Maintenance

DANGER USE EXTREME CAUTION when the rear cover of any EFX is removed. Serious injury could result if fingers are pinched between the flywheel spokes, cranks, movable arms, and the drive weldment. Securing the movable arm to the crank with a clamp is recommended. Be aware of other people within your work area who might cause the arm to move.

Perform the following maintenance tasks every month:

1.Clean the frame, cover and arms with water or an approved cleaner.

2.Wipe the exterior of the console with a damp sponge or soft cloth, and dry with a clean towel. Keep water away from electronic components to prevent electrical shock or damage.

3.Clean the touchscreen using a soft, lint-free cloth dampened with a 91% isopropyl alcohol solution (either as sold or diluted with an equal amount of water).

4.Remove the rear cover. Vacuum out any debris, being careful not to bring the vacuum cleaner nozzle too close to any circuit board (unless your vacuum cleaner is protected against static buildup).